Engineering, 23.04.2021 16:00 jlbradley429

Penicillin G reacts with hydroxylamine (NO2OH) to form hydroxamic acid, which produces a colored complex with iron(III). To determine the overall reaction order, equal concentrations of penicillin and NH2OH were mixed together in a 250-mL flask [J. Chem. Educ., 49, 539 (1972)]. Samples were withdrawn every 10 minutes and added to a solution containing iron(III) chloride. With the aid of a colorimeter, the concentration of the colored complex, and hence the concentration of hydroxamic acid, was obtained as a function of time. The absorbance shown in the table below is directly proportional to the hydroxamic acid concentration. Time(min) 0 10 20 30 40 50 infinity
Absorbance 0.00 0.337 0.433 0.495 0.539 0.561 0.665
(a) Use the nonlinear least squares (i. e., regression) and one other technique to determine the reaction order, , and specific reaction rate, k.
(b) What experimental conditions would you suggest if you were to obtain more data?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

You know the right answer?

Penicillin G reacts with hydroxylamine (NO2OH) to form hydroxamic acid, which produces a colored com...

Questions