8th grade tech. On a cantilever bridge, if the cantilever part (the part that overhangs or sticks out) is 10 feet, how many feet do you think should be anchored or not
sticking out? Create a sketch to help you determine your answer. PLEASE HELP QUICK BESTIES

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false