Engineering, 20.04.2021 15:30 cheergirlpayton3510

A member in bending due to the 40 lbforce at the right end is to be sized. Say the thickness is 0.25 in, but the height in the plane is to be determined. Let the maximum allowable bending stress be 12,000 psi. Consider three cross-sections: (a) midway between the supports, (b) at the roller, and (c) midway between the roller and the load at the end. For each cross-section determine the minimum necessary height so that the maximum bending stress is 12,000 psi

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

You know the right answer?

A member in bending due to the 40 lbforce at the right end is to be sized. Say the thickness is 0.25...

Questions