subject
Engineering, 19.04.2021 16:10 razielcornils04

During a heavy snowstorm, a new Civil Engineering building at the University of Indiana collected 6 feet of snow on its roof. The Indiana alumni who designed the building forgot to account for snow loads and the storm caused the building to become highly overloaded. As a result, a single column in the middle of the building failed. Luckily no one was hurt, and the failure underwent extensive forensic testing to determine why only a single column failed under the overloading condition. The forensic study concluded that the applied load, the material properties, and all the dimensions for the failed column were exactly the same as the surrounding columns that did not fail. Thus, after millions of dollars spent in research, the University of Indiana Engineers have determined the problem inexplicable. Required:
Explain to the puzzled Hoosiers how a failure of this most likely occurred given the findings of the forensic study.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
During a heavy snowstorm, a new Civil Engineering building at the University of Indiana collected 6...
Questions
Questions on the website: 13722363