Engineering, 18.04.2021 01:00 mandoux
The length of a pipe with 1 T = 12.155’ ft e/c . What is e/e length if the fitting allowance is 1 3/4”inch
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
The length of a pipe with 1 T = 12.155’ ft e/c . What is e/e length if the fitting allowance is 1 3/...
Questions
Mathematics, 23.04.2020 20:35
History, 23.04.2020 20:35
Mathematics, 23.04.2020 20:35
History, 23.04.2020 20:35
Mathematics, 23.04.2020 20:35
Mathematics, 23.04.2020 20:35
History, 23.04.2020 20:35
History, 23.04.2020 20:35
Chemistry, 23.04.2020 20:35
History, 23.04.2020 20:35
Mathematics, 23.04.2020 20:35
Biology, 23.04.2020 20:35
