Engineering, 15.04.2021 21:20 Nell3856

PLEASE ANSWER ASAP Select the correct text in the passage.
Below is a manufacturing company's mission statement which sentence in the mission statement goes against Edward Demnings 14 point
program?
Our goal is to improve systems and processes continually and thereby reduce costs. We will provide on-the-job training to all employees to
limpart adequate knowledge. The objective of supervision will be to identify incapable employees that hamper quality and remove them from
the system. Regular meeting between employees and management will ensure employees can express their views and concerns. These
meetings will also enable management to share the vision of the company's growth and transformation with the employees. Our focus
throughout will be on process improvement and quality.

PLEASE ANSWER ASAP

Select the correct text in the passage.
Below is a manufacturing company's mis

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

You know the right answer?

PLEASE ANSWER ASAP Select the correct text in the passage.
Below is a manufacturing company's...

Questions