subject
Engineering, 12.04.2021 23:40 kennyduong04

g Consider an adiabatic water pump with following operating condition: the mass flow rate through the pump is 1 kg/sec; enthalpy at the entry is 100 kJ/kg; enthalpy at the exit is 250 kJ/kg; entropy at the entry is 2.0 kJ/kg-K; entropy at the exit is 2.1 kJ/kg-K. The dead state is defined as 1 atm and 27 degree Celsius. The exergy destruction in the pump is

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
g Consider an adiabatic water pump with following operating condition: the mass flow rate through th...
Questions
question
Mathematics, 14.12.2019 02:31
Questions on the website: 13722367