Engineering, 09.04.2021 20:10 simplemickey123
Explain how would you show T(torque) and L(length) very directly in the angle of twist equation.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Explain how would you show T(torque) and L(length) very directly in the angle of twist equation....
Questions
Mathematics, 06.10.2020 18:01
Mathematics, 06.10.2020 18:01
Biology, 06.10.2020 18:01
History, 06.10.2020 18:01
Mathematics, 06.10.2020 18:01
Mathematics, 06.10.2020 19:01
Mathematics, 06.10.2020 19:01
Mathematics, 06.10.2020 19:01
Mathematics, 06.10.2020 19:01
Mathematics, 06.10.2020 19:01
Mathematics, 06.10.2020 19:01
