Two dogbone specimens of identical geometry (same gauge lengths and cross-sectional areas) but made of two different materials: steel and aluminum are tested under tension at a fixed load rate. If the displacement rate needed to achieve the specified load rate for aluminum specimen is 0.001 inch/min, determine the displacement rate that must be applied on the steel specimen to achieve the specified load rate. Given, Young's modulus (E) of steel is 29,000 ksi and that of aluminum is 10,000 ksi.

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.