Engineering, 06.04.2021 02:40 karebareyo

T-butyl alcohol (tba) is an important octane enhancer that is used to replace lead additives in gasoline [ind. eng. chem. res., 27, 2224 (1988)]. tba was produced by the liquid-phase hydration (w) of isobutene (i) over an amberlyst-15 catalyst. the system is normally a multiphase mixture of hydrocarbon, water, and solid catalysts. however, the use of cosolvents or excess tba can achieve reasonable miscibility. the reaction mechanism is believed to be:. i + s > < i * s
w + s > < w * s
w * s + i * s > < tba * s + s
tba * s > < tba + s
1. Derive a rate law assuming:
a) The surface reaction is rate - limiting
b) The adsorption of isobutene is limiting.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

Answer

You know the right answer?

T-butyl alcohol (tba) is an important octane enhancer that is used to replace lead additives in gaso...

Questions