Engineering, 06.04.2021 02:00 jaydenrenee111902
Part.1 Complete 3 of the 5 HW-style problems that follow (12 points): 1. (4 points) In a gear system, segments (1) and (2) are both solid 1- inch-diameter. Motor rotation speed is 100 Hz. Allowable shear stress for each shaft is 8700 PSI. Calculate (a) The rotation speed of gear E (in Hz). (b) The allowable torque TE at gear E. (c) The maximum power that can be transmitted by the gear train (No FBD required)
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Part.1 Complete 3 of the 5 HW-style problems that follow (12 points): 1. (4 points) In a gear system...
Questions
Health, 24.07.2019 12:00
Health, 24.07.2019 12:00
