subject
Engineering, 02.04.2021 18:30 kenzieleigh7345

You are in charge of estimating the runoff for generated over a 40-acre basin due to a 100-year 30-min design storm that produced 2.71 inches over 30 minutes, assuming uniform precipitation over the 30 minutes. The soils in the watershed are 33% clay, 59% silt and 8% sand. Prior to the storm, the soil had an effective saturation of 25% with an initial infiltration capacity of 17.8 cm/hr. From previous events, it was determined that the soil has a time constant k of 3.45 hr-1, and an ultimate infiltration capacity of 1.7 cm/hr. a. Derive an equation for time to ponding using the Horton model
b. Estimate the time to ponding (minutes) for the watershed basin using the Horton model and the Green-Ampt model. Discuss why these values are the same/different.
c. Use the Horton and Green-Ampt model to estimate the total infiltration (cm) during the storm
d. What is the runoff (acre-ft) using the Horton model and Green-Ampt model?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
question
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
You are in charge of estimating the runoff for generated over a 40-acre basin due to a 100-year 30-m...
Questions
question
Mathematics, 01.12.2021 01:30
Questions on the website: 13722363