subject
Engineering, 02.04.2021 03:50 jjgymnast5779

2. Given a 50KVA single phase distribution transformer with voltage 2400/240VAC (center tapped on the secondary) and with 3.0% impedance. Using the low voltage side, solve for the following: a) Ibase, the base current, b) Zbase, the base impedance, c) Zact, the actual impedance, d) Isc, the short circuit current if a short circuit would be directly across the low voltage terminals Assume the entire impedance consists of reactance.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
2. Given a 50KVA single phase distribution transformer with voltage 2400/240VAC (center tapped on th...
Questions
question
Social Studies, 29.12.2021 04:00
Questions on the website: 13722363