Engineering, 01.04.2021 23:00 Eni1127
While discussing voltage drop: Technician A says voltage drops in a closed circuit must equal source
voltage. Technician B says that voltage drops can be calculated by multiplying circuit voltage times the
load's resistance. Who is correct?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
You know the right answer?
While discussing voltage drop: Technician A says voltage drops in a closed circuit must equal source...
Questions
Advanced Placement (AP), 11.10.2019 00:00
Advanced Placement (AP), 11.10.2019 00:00
Computers and Technology, 11.10.2019 00:00
Mathematics, 11.10.2019 00:00
English, 11.10.2019 00:00
Social Studies, 11.10.2019 00:00
History, 11.10.2019 00:00
Health, 11.10.2019 00:00
