Engineering, 31.03.2021 23:40 memester74
The yield stress of a steel is 250Mpa. A steel rod used for implant in a femurneeds to withstand 29KN. What should the diameter of the rod be not to deform
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
You know the right answer?
The yield stress of a steel is 250Mpa. A steel rod used for implant in a femurneeds to withstand 29K...
Questions
Social Studies, 22.08.2019 23:20
History, 22.08.2019 23:20
History, 22.08.2019 23:20
Arts, 22.08.2019 23:20
Mathematics, 22.08.2019 23:20
Computers and Technology, 22.08.2019 23:20
