Engineering, 31.03.2021 02:00 Zaydblackwood06

The catalytic gas phase reaction A rightarrow B is to be carried out in a packed bed reactor under isothermal operation. The reactant is pure A with an inlet concentration of 1 g-mol/dm3, the entering pressure is 25 atm and the entering volumetric flow rate is 1 dm3/min. the first order reaction rate constant K, which is based on reactant A is 1 dm3/kg. cat. min. 1. Develop the chemical reaction engineering algorithm, - mole balance, rate laws stoichiometry and combine them together, finally solve the following using MATLAB
2. Study the effect of the pressure drop on the conversion for the first order reaction and plot conversion and pressure (p = P/Po) as a function of the weight of the packing material W. consider the pressure drop parameter a is between 0.05 - 0.2 /kg, also consider the maximum weight of the catalyst is 2 kg.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

You know the right answer?

The catalytic gas phase reaction A rightarrow B is to be carried out in a packed bed reactor under i...

Questions