Engineering, 29.03.2021 09:30 almostnevercbbc
The average wind velocity in a particular area is found to be 5.5m/s. It is
proposed to install a wind driven turbine with a blade radius of 1.8m. The
proposed design has an interference factor of 0.21 and a torque coefficient of 0.8.
Determine:
a) The expected power output of the turbine.
b) Thrust on the turbine.
c) Torque on the turbine.
d) Rotational speed.
Note: Assuming the air density is 1.2 kg/m3​
Answers: 2
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
The average wind velocity in a particular area is found to be 5.5m/s. It is
proposed to install a w...
Mathematics, 27.01.2020 04:31
Arts, 27.01.2020 04:31
Chemistry, 27.01.2020 04:31
Mathematics, 27.01.2020 04:31
Geography, 27.01.2020 04:31
Chemistry, 27.01.2020 04:31