subject
Engineering, 29.03.2021 01:40 coreycullen6862

1. Si en un Circuito Paralelo resistivo de cuatro (4) resistencias de qual valor ohmico, alguna de las resistencias se retira del circuito, entonces a. La intensidad total aumenta
b. La tensión total aumenta
c. La intensidad total disminuye
d. La tension total disminuye

2. Todas las resistencias de un circuito sere están
a. Sometidas a un divisor de tensión b. Sometidas a diferente Intensidad
c. Sometidas a distinta Intensidad y Tension
d. Sometidas a la misma Fuerza mecánica

3. Tres Resistores de 0.18KO, 0.27Ky 0.12K conectados en paralelo y sometidos a una tensión de 5​

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
question
Engineering, 06.07.2019 04:10
Steam enters a converging nozzle at 3.0 mpa and 500°c with a negligible velocity, and it exits at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: is isentropic (a) (b) has an efficiency of 94 percent
Answers: 1
You know the right answer?
1. Si en un Circuito Paralelo resistivo de cuatro (4) resistencias de qual valor ohmico, alguna de l...
Questions
question
Health, 05.01.2021 02:20
question
Physics, 05.01.2021 02:20
question
Mathematics, 05.01.2021 02:20
Questions on the website: 13722367