Engineering, 26.03.2021 19:50 tommyaberman
A ramp with a mechanical advantage of 6 is used to move a 36-newton load. what input force is needed to push the load up the ramp
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
A ramp with a mechanical advantage of 6 is used to move a 36-newton load. what input force is needed...
Questions
History, 03.07.2019 10:20
History, 03.07.2019 10:20
History, 03.07.2019 10:20
Biology, 03.07.2019 10:20
Mathematics, 03.07.2019 10:20
History, 03.07.2019 10:20
Mathematics, 03.07.2019 10:20
Biology, 03.07.2019 10:20
Mathematics, 03.07.2019 10:20
History, 03.07.2019 10:20
