Engineering, 21.03.2021 23:50 iiisavageoreo

Q2: Use navigation sensors to track an AUV with acoustic transceivers and DVL Q2.1. We have two acoustic hydrophones to detect the sound transmitted from the AUV. As shown in the figure below, the range to the AUV measured by the #1 hydrophone is 200m and by #2 hydrophone is 215m, and the baseline, b, is 20 meters. What is the vertical and horizontal distance between the AUV and hydrophone #1? [10pts]. The equation that will be used is in Topic-4 presentation. (show full calculation steps)

Q2.2. The AUV is equipped with a DVL that transmits sound at 1MHz. The beam angle is 22.5 degrees. The AUV is moving at a speed, u, of 2 m/s. As presented in the lecture, we can separate it into two components, one along the sound transmission of #1 beam on the DVL, one is perpendicular to the sound transmission. Question: now let’s separate u relative to beam #2, draw the two components in the figure and compute the magnitude of the two components. [5pts]

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

You know the right answer?

Q2: Use navigation sensors to track an AUV with acoustic transceivers and DVL Q2.1. We have two aco...

Questions