Engineering, 19.03.2021 19:00 Crxymia

A watershed in the neighborhood of Holly Springs has a total drainage area of 500 acres with an average slope of 0-3%. The soil is clayey loam (Soil group - C) with different land use types comprising 30% open spaces (CN = 74), 20% commercial business areas (CN = 94), 20% residential areas (CN = 83) and the rest of the land being wooded (CN = 74). Residential area is typically a single family home with a lot size of 0.25 acres. Assume 'g' = 232 and 'h' = 23 for the IDF curve. Based on this information, estimate the average discharge that would occur from the watershed over 8 hours. Also estimate the runoff depth, infiltration and average discharge at an increment of 2 hours over 8 hours.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

You know the right answer?

A watershed in the neighborhood of Holly Springs has a total drainage area of 500 acres with an aver...

Questions