You are working as an electrical technician. One day, out in the field, you need an inductor but cannot find one. Looking in your wire supply cabinet, you find a cardboard tube with single-conductor wire wrapped uniformly around it to form a solenoid. You carefully count the turns of wire and find that there are 570 turns. The diameter of the tube is 8.10 cm, and the length of the wire-wrapped portion is 35.0 cm. You pull out your calculator to determine the following. a. the inductance of the coil (in mH)
b. the emf generated in the coil if the current in the wire increases at the rate of 3.00 A/s (Enter the magnitude in mV.)

a) the inductance of the coil is 6 mH

b) the emf generated in the coil is 18 mV  

Explanation:

Given the data in the question;

N = 570 turns

diameter of tube d = 8.10 cm = 0.081 m

length of the wire-wrapped portion l =  35.0 cm = 0.35 m

a) the inductance of the coil (in mH)

inductance of solenoid

L = N²μA / l

A = πd²/4  

so

L = N²μ(πd²/4) / l

L = N²μ(πd²) / 4l

we know that μ = 4π × 10⁻⁷ TmA⁻¹

we substitute

L = [(570)² × 4π × 10⁻⁷× ( π × (0.081)² )] / 4(0.35)

L =  0.00841549 / 1.4

L = 6 × 10⁻³ H    

L = 6 × 10⁻³ × 1000 mH

L = 6 mH

Therefore, the inductance of the coil is 6 mH

b)

Emf ( ∈ ) = L di/dt

given that; di/dt = 3.00 A/sec

{∴ di = 3 - 0 = 3 and dt = 1 sec}

Emf ( ∈ ) = L di/dt

we substitute

⇒ 6 × 10⁻³ ( 3/1 )

= 18 × 10⁻³ V

= 18 × 10⁻³ × 1000

= 18 mV  

Therefore, the emf generated in the coil is 18 mV  

answer:

fvbyunjk

explanation:

answer:

i need con this question too