Engineering, 18.03.2021 03:30 anika420

Choose the type of alternative energy that you will advocate for. You may choose either a wind farm with an attached plant for generating electricity, or a biomass farm with an attached processing plant for generating biofuel. Choose a location where your farm will be built. You must specify a state in the United States and the approximate location within that state. If you wish, you can choose an actual city or town within your location, or you can invent a hypothetical community.
Design a minimum of 10 slides that you will use in your presentation. The slides can be either created on separate pieces of 8.5" x 11" white paper, or they can be designed using computer software such as PowerPoint. The slides should address why the community was targeted, the science behind the technology, and the benefits to the community; they should also address any concerns that you anticipate the community will have. You don’t have to use references outside of this lesson, but you may do so if you wish. Be sure to cite any outside references on your slides.
Give a 15-minute oral presentation using your slides. Imagine that you are addressing the community in a town hall-style meeting and using your slides to illustrate your points. If you can’t give your presentation to your instructor in person, you may film your presentation.

Upload your slides and your 15-minute presentation that reveal your pitch for alternative energy.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

You know the right answer?

Choose the type of alternative energy that you will advocate for. You may choose either a wind farm...

Questions