Liquid water is throttled through avalve from500 kPa and 150oC to300 kPa. A flash chamber is used to separate the liquid from the vapor such that saturated liquid water exits from the bottom of the chamber at 300 kPa while saturated vapor exits from the top at the same pressure. The water vapor (steam) is then expanded in a turbine to a pressure of 10 KPa. The turbine has an isentropic efficiency of 90%. Calculate: (a) the rate of exergy destroyed in the valve and flash chamberper kg of water entering the flash chamber, and (b) the turbine exergetic efficiency.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan