subject
Engineering, 18.03.2021 01:20 lizzy2951

The heat transfer rate per unit width from a longitudinal section, x_{2}-x_{1}x 2 −x 1 , can be expressed as q_{12}^{\prime}=\bar{h}_{12}\left(x _{2}-x_{1}\right)\left(T_{s}T_{\inf ty}\right)q 12 = hˉ12 (x 2−x 1)(T s−T [infinity]), where \bar{h}_{12} h-12 is the average coefficient for the section of length \left(x_{2}-x_{1}\right)(x 2 −x 1 ). Consider laminar flow over a flat plate with a uniform temperature T_{s}T s The spatial variation of the local convection coefficient is of the form h_{x}=C x^{-1 / 2}, where C is a constant. (a) Beginning with the convection rate equation in the form d q^{\prime}=h_{x} d x\left(T_{s}-T_{\infty}\right)dq =h x dx(T s −T [infinity] ), derive an expression for \bar{h}_{12} hˉ12 in terms of C, x_{1}x 1 and x_{2}x 2 (b) Derive an expression for \bar{h}_{12} h-12 in terms of x_{1}, x_{2}x 1 ,x 2 , and the average coefficients \bar{h}_{1} hˉ1 and \bar{h}_{2} hˉ2 , corresponding to lengths x_{1}x 1 and x_{2}x 2, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
The heat transfer rate per unit width from a longitudinal section, x_{2}-x_{1}x 2 −x 1 , can be expr...
Questions
question
Mathematics, 19.08.2020 21:01
question
Social Studies, 19.08.2020 21:01
question
Mathematics, 19.08.2020 21:01
Questions on the website: 13722362