Engineering, 18.03.2021 01:20 niyahdabadest

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes the motor inductance. Find the transfer function with voltage as input and speed as output.
b) Develop the model that neglects the motor inductance. Find the transfer function with voltage as input and speed as output.
c) What are eigenvalue(s) for the system (for both models)? What is the corresponding time constant if the inductance of the motor is neglected?
d) Develop the model using Matlab: Simulate the step response of the motor to an input voltage of 24 Volts and compare the model with and without the motor inductance (plot the speed outputs on the same graph).

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

You know the right answer?

Develop the model for a motor (from volts to speed). By March 8 a) Develop the model that includes...

Questions