4 pts) You are working in a MEMS process with a single, 10 micron thick polySi layer that can be released and suspended above the substrate. The minimum feature size (both line and space) in your process is 2 microns. We will define the z-axis to be out of the wafer plane and the x-axis and y-axis to be in the plane of the wafer. Design an accelerometer geometry that has a displacement sensitivity of 1 micron/G where 1 G

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

The higher the astm grain size number, the finer the gran is. a)-true b)-false