Engineering, 08.03.2021 22:40 scholar13

1) Draw a one-line schematic (by hand, PowerPoint, or other) and label components for a network consisting of: (10 pts). a) A 4160 VAC distribution feeder b) A 480 VAC main bus c) A transformer connecting the 4160 VAC distribution feeder to the 480 VAC main bus d) Isolation equipment (breaker) on each side of the transformer e) Solar PV generating power with range 300-700 VDC f) Solar PV inverter with input power in the range of 300-700 VDC to produce output power at 480 VAC, connected to the main bus g) A 480 VAC motor connected to the main bus h) A step-down transformer from 480 VAC to 120 VAC to power building electrical outlets i) Load for the building electrical outlets j) Battery with operating range 400-600 VDC k) Battery bi-directional inverter with operating range 400-600 VDC (DC side) and 480 VAC (AC side) connected to the main bus l) Stand-by generator with 480 VAC output connected directly to the main bus

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

Answer

Engineering, 05.07.2019 04:30

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

Answer

Engineering, 06.07.2019 03:20

Asimply supported beam abc of length l has ab of length hl and second moment of area / and bc of length hl and second moment of area i2. determine the strain energy stored in the beam when it is subject to a vertical load f at its midpoint and the consequential central deflection.

Answers: 2

Answer

You know the right answer?

1) Draw a one-line schematic (by hand, PowerPoint, or other) and label components for a network cons...

Questions