Engineering, 08.03.2021 20:10 enrique3300

Rick Wing, salesperson for Wave Soldering Systems, Inc. (WSSI), has provided you with a proposal for improving the temperature control on your present machine. The machine uses a hot-air knife to cleanly remove excess solder from printed circuit boards; this is a great concept, but the hot-air temperature control lacks reliability. According to Wing, engineers at WSS1 have improved the reliability of the critical temperature controls, The new system still has the four sensitive integrated circuits controlling the temperature, but the new machine has a backup for each. The four integrated circuits have reliabilities of .90, .92, .94, and .96. The four backup circuits all have a reliability of .90. a) What is the reliability of the new temperature controller?
b) If you pay a premium. Wing says he can improve all four of the backup units to .93. What is the reliability of this option?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

Rick Wing, salesperson for Wave Soldering Systems, Inc. (WSSI), has provided you with a proposal for...

Questions