Engineering, 07.03.2021 23:20 imamnaab5710
Show by chemical equations the polymerization of acrylonitrile initiated by the Thermal descomposition of cumyl hidroperoxide
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 06.07.2019 03:30
An ammonia compressor has a 5% clearance volume and displacement rate of 80 l/s and pumps against a condensing temperature of 40°c. for two different temperatures of -10°c and 10°c, compute the mass flow rate of refrigerant assuming the clearance volumetric efficiency applies. discharge specific volume corresponding to-10°c and 10°c are 112.5 l/kg and 95 l/kg, respectively.
Answers: 2
You know the right answer?
Show by chemical equations the polymerization of acrylonitrile initiated by the Thermal descompositi...
Questions
Advanced Placement (AP), 17.02.2021 17:30
History, 17.02.2021 17:30
Mathematics, 17.02.2021 17:30
Mathematics, 17.02.2021 17:30
Social Studies, 17.02.2021 17:30
Mathematics, 17.02.2021 17:30
History, 17.02.2021 17:30
Social Studies, 17.02.2021 17:30
Social Studies, 17.02.2021 17:30
History, 17.02.2021 17:30
Mathematics, 17.02.2021 17:30
