Engineering, 01.03.2021 08:00 lauraabosi
A thin 20-cm*20-cm flat plate is pulled at 1m/s horizontally through a 4-mm thick oil layer sandwiched between two stationary plates, as shown in the figure. the dynamic viscosity of oil is 0.03pa. s .assuming the velocity in each layer to vary linearly, plot the velocity profile and explain why the profile takes that shape and determine the force that needs to be applied on the plate to mantain this motion when the h1=1.5mm and h2 2.5mm
Answers: 2
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
A thin 20-cm*20-cm flat plate is pulled at 1m/s horizontally through a 4-mm thick oil layer sandwich...
Mathematics, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20
English, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20
Social Studies, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20
Arts, 26.03.2021 05:20
Chemistry, 26.03.2021 05:20
Mathematics, 26.03.2021 05:20