subject
Engineering, 28.02.2021 16:50 warnene17

A vertical aerial photograph reveals a tall building. The foot of one corner of the building has (x, y) coordinates (30.5, 62.0) (both measured in mm from the lower left- hand corner of the negative), and the top of the same edge appears at (19.0, 58.0). The corresponding coordinates for an adjacent edge of the building are (30.5, 73.0) and (19.0, 71.5). Given that the camera's focal length was 88 mm and the aircraft's altitude 212 m, find (i) the coordinates of the photograph's principal point (directly below the camera),
(ii) the height, and
(iii) the width of the building.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
A vertical aerial photograph reveals a tall building. The foot of one corner of the building has (x,...
Questions
question
Biology, 27.09.2020 17:01
question
English, 27.09.2020 17:01
Questions on the website: 13722367