Engineering, 27.02.2021 14:00 jgee13
. A shaft carries five masses A, B, C, D and E which revolve at the same radius in
planes which are equidistant from one another. The magnitude of the masses in planes
A, C and D are 50 kg, 40 kg and 80 kg respectively. The angle between A and C is
90° and that between C and D is 135º. Determine the magnitude of the masses in
planes B and E and their positions to put the shaft in complete rotating balance.​
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
. A shaft carries five masses A, B, C, D and E which revolve at the same radius in
planes which are...
Questions
Mathematics, 23.03.2020 16:56
English, 23.03.2020 16:56
Mathematics, 23.03.2020 16:56
Biology, 23.03.2020 16:56
Computers and Technology, 23.03.2020 16:56
Mathematics, 23.03.2020 16:56
Social Studies, 23.03.2020 16:56
