Engineering, 25.02.2021 18:20 domjuan1456

A thin-walled cylinder is made of material that has a Young's modulus of 70 GPa, a Poisson's ratio of 0.33, and a coefficient of thermal expansion of 24×10−6 /?C. It has an average radius of 100 mm, and a wall thickness of 2.0 mm. The cylinder is constrained between two rigid walls, so that it can't expand in the axial direction. It is pressurized to an internal pressure of 1.5 MPa, and then the temperature is raised. What is the maximum temperature rise that can occur without the maximum shear stress in the cylinder exceeding 75 MPa?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

A thin-walled cylinder is made of material that has a Young's modulus of 70 GPa, a Poisson's ratio o...

Questions