subject
Engineering, 22.02.2021 19:00 lrasanaoaksandfurana

The following spot speeds were measured at a location along a two-lane highway (for one direction only), over a period of 10 minutes. 69 54 67 69 58 62 57 61 63 58 60 60 58 54 57 60 71
65 57 63 69 69 59 54 60 67 58 46 53 59 62 54 58 68
66 59 57 64 58 52 61 65 61 53 58 57 65 47 64 54 68
59 59 62 57 66 67 58 64 60 59 59 63 56 62 64 59 57
61 61 58 57 64 70

Calculate the following traffic stream parameters:

a. Time mean speed
b. Space mean speed (assume that all vehicles were traveling at a constant speed)
c. Hourly flow rate
d. Density
e. Sketch the speed-flow curve for these traffic conditions, assuming that the roadway capacity and free-flow speed have previously been determined to be 1800 veh/h/In and 62 mill, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
The following spot speeds were measured at a location along a two-lane highway (for one direction on...
Questions
question
Social Studies, 07.09.2021 22:50
question
Mathematics, 07.09.2021 22:50
question
Mathematics, 07.09.2021 22:50
question
Mathematics, 07.09.2021 22:50
Questions on the website: 13722363