subject
Engineering, 17.02.2021 01:00 emory238

A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream and fed to a reactor overseen by Romana and Boswell. The flow rate of the fresh feed is 456 mol/hr with
mole fractions of 0.057 for butanol, 0.539 for oxygen, and the balance nitrogen. The reactor effluent
contains butanol, oxygen, nitrogen, CO2, NOx, and water (W, H20), which is fed to a separator. A gas
stream containing oxygen, nitrogen, CO2, NO2, and some of the water exits the separator, and a
butanol/water stream also exits the separator. Ninety-five times more water exits the separator in the
gas stream than exits the overall system in the purge stream. The overall conversion of butanol is 78%,
and the single pass conversion of butanol is 55%. The component flow rates of oxygen and nitrogen
leaving the separator are 65,8 mol/hr and 155 mol/hr, respectively,
In the last level, the overall system was solved. Component molar flow rates were found in units of
mol/hr as ň4,co, - 81.1. NA, NO, = 58.4, ņa, w = 100.3, no, B = 5.72, and now = 1.056,
Now, find the component molar flow rate (mol/hr) of the feed to the reactor
02,N2
NB
Ex: 29.2
02,02 =
EX 194
n2,w =
Ex: 1.50
mol/h
mol/hr
Ex: 146
mol/hr
mol/hr

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
A fresh feed of butanol (B, C, H, OH), oxygen (O2), and nitrogen (N2) is mixed with a recycle stream...
Questions
question
Mathematics, 29.11.2019 12:31
question
Mathematics, 29.11.2019 12:31
Questions on the website: 13722363