Engineering, 16.02.2021 14:00 unkown77

TREFOIL Question
Ten
9
It proposed to use
10A use of non-inductive shunt to increase the range of 10A moving iron ammeter to 100A. The resistance of the instrument including the leads, to the aunts is 0.06ohms and the inductance is 15microHenries at full scale. find the error at full scale on a 50Hz a. c circuit

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

You know the right answer?

TREFOIL Question
Ten
9
It proposed to use
10A use of non-inductive shunt to inc...

Questions