Engineering, 15.02.2021 20:30 Alexaisokay1

Suppose you want to build a digital logic project using only NAND gates. The output of each NAND gate will be connected to the inputs of one or more other NAND gates. Assume that the logic chips you are using have the following characteristics. Compute the DC noise margin and the largest fanout (number of gate inputs connected to a single output) that you can achieve while still maintaining the stated DC noise margin. VCC= 4.5V VOH= 4.0 V VOL= 0.5V VIH= 2.4V VIL=2.1V
VTH= (VOH- VOL)/2 IOH= -10μA IOL= 10μA IIH= 1μA IIL= -1μA

Calculate the following values:
a. Noise margin for HIGH (Volts):
b. Noise margin for LOW (Volts):
c. Noise margin overall (Volts):
d. Practical Fanout for HIGH:
e. Practical Fanout for LOW:
f. Practical Fanout overall:

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

You know the right answer?

Suppose you want to build a digital logic project using only NAND gates. The output of each NAND gat...

Questions