Engineering, 15.02.2021 14:20 cobalt3931
A short compression specimen is composed of concrete and steel. The total cross-sectional area is equal to 15,000mm^2, comprise of 2,500mm^2 of steel surrounded by 12,500mm^2 of concrete. The specimen is subjected to an axial test load which produces a stress of 6N/mm^2 in the concrete. Calculate 1) the stress in steel, 2) the test load referred to. E(steel) = 210kN/mm^2 , E(concrete) = 14kN/mm^2
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
A short compression specimen is composed of concrete and steel. The total cross-sectional area is eq...
Questions
History, 31.08.2020 01:01
Mathematics, 31.08.2020 01:01
Mathematics, 31.08.2020 01:01
Chemistry, 31.08.2020 01:01
Mathematics, 31.08.2020 01:01
