Engineering, 09.02.2021 20:30 Aliyahh5988

(Need answers fast !! Will give brainliest to correct answer.) 1 - Pushing a button
(Options)
Arduino, Code, User.

2- Input voltage changes
(Options)
Arduino, Code, User.

3- PWM creates high-frequency pulses
(Options)
Arduino, Code, User.

4- LED blinks slowly
(Options)
Arduino, Code, User.

5- digitalWrite() command
(Options)
Arduino, Code, User.

6- Piezo buzzer beeps
(Options)
Arduino, Code, User.

7- map() function changes a number
(Options)
Arduino, Code, User.

8- Ultrasonic distance sensor detects when an object is nearby
(Options)
Arduino, Code, User.

9- The analog voltage level that the ultrasonic distance sensor creates
(Options)
Arduino, Code, User.

10- The difference between digitalWrite() and analogWrite() function calls
(Options)
Arduino, Code, User.

- Vamp :-)

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

(Need answers fast !! Will give brainliest to correct answer.) 1 - Pushing a button
(Options...

Questions