subject
Engineering, 08.02.2021 18:50 jayelijah0508

1) Start the experiment and monitor concentration at various times Plot A vs t - If linear – zero order
2) Plot Ln A vs t – If linear – first order
3) Plot 1/A vs t – If linear – second order
Problem 1: Finding the Rate Constant and Order of a Reaction
The following are data from an experiment to assess the disinfection of a water supply with a given dosage of chlorine. Using Excel, generate 3 plots assuming zero, first, and second order kinetics. Show R2 and equation on the plots (use trendline feature in excel). Find the k value of the best fit. You have to turn in 3 plots and indicate the best fit and a corresponding k-value. Also indicate the order of the reaction. (Problem modified from: Sawyer et al., 2003. Chemistry for Envi. Engr. & Science, McGraw Hill).
Time (min) 0 10 20 30 60
% Bacteria Remaining 100 70 21 6.3 0.6

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
1) Start the experiment and monitor concentration at various times Plot A vs t - If linear – zero o...
Questions
Questions on the website: 13722363