Engineering, 08.02.2021 18:40 sistersquad
Air enters an adiabatic compressor at 100 kPa and 17 ºC at a rate of 2.4 m^3/s, and itexits at 257 ºC. The compressor has an isentropic efficiency of 84 percent. Neglecting the changes in kinetic and potential energies, determine the exit pressure of the air and the power required to drive the compressor. Use constant specific heatsfor air (Cp=1.005 kJ/kgK, γ=1.4, R =0.287 kJ/kgK)
Answers: 3
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Air enters an adiabatic compressor at 100 kPa and 17 ºC at a rate of 2.4 m^3/s, and itexits at 257 º...
Mathematics, 22.09.2020 19:01
Mathematics, 22.09.2020 19:01
History, 22.09.2020 19:01
Mathematics, 22.09.2020 19:01
Mathematics, 22.09.2020 19:01
Mathematics, 22.09.2020 19:01
Chemistry, 22.09.2020 19:01