Engineering, 07.02.2021 22:20 zalliagessnerp5fuj9
Krit University
Example 2.2: (a) If the T-beam shown is uncracked, calculate the stress in the concrete
at the top and bottom extreme fibers under a positive bending moment of 112 kN. m.
(b) If f. - 20.7 MPa and normal weight concrete is used, what is the maximum
uniformly distributed load the beam can carry if it is used as a simple beam with 7 m
span without exceeding the modulus of rupture of the concrete?
(c) Repeat part (b) if the beam is inverted,
br1500mm
= 270mm
he 125mm
centroid
675mm
530mm
wing
Answers: 2
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Krit University
Example 2.2: (a) If the T-beam shown is uncracked, calculate the stress in the conc...
Mathematics, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01
Computers and Technology, 07.09.2020 09:01
English, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01
Mathematics, 07.09.2020 09:01