Engineering, 05.02.2021 21:10 minerrage43

After answering the following questions, review the laboratory exercise procedures and p how you will use the experience gained in these calculations to find the values sought. 1. Using the information provided in the Background section, calculate the average voltage, the avera absolute voltage, and the rms voltage values for the symmetrical sine, square, and triangular waveforr assuming that the peak value of each waveform is 2V.
Table 2.1: Calculated Voltage Values Average Voltage Average Absolute Voltage RMS Voltage Sine Square Triangular 6
2. Compute the RMS voltage value that would be reported by non-true rms voltmeters, assuming the peak value of each waveform is 2V. You may use the equations derived in the Background sec for these calculations.
Table 2.2: Reported Voltage Value by non-true RMS voltmeters Reported RMS Voltage Sine Square Triangular

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

After answering the following questions, review the laboratory exercise procedures and p how you wil...

Questions