Engineering, 01.02.2021 21:50 kelsiee24

Suppose that you have two machines. Machine A gives 10 horsepower, and machine B gives 20 horsepower. You will use these machines to lift an object. Suppose that Machine A takes 1 kJ of energy to lift the object, and it does so in 1 minute. Select all of the statements below that are correct (there may be one or more)? (We assume machines are using their full horsepower, and there are no losses). A. The object will take 1/2 kJ of energy for machine B to lift.
B. The object will take 1 kJ of energy for machine B to lift.
C. The object will take 2 kJ of energy for machine B to lift.
D. The object will be lifted in V2 minute by machine B.
E. The object will be lifted in 1 minute by machine B.
F The object will be lifted in 2 minutes by machine B.
G. None of the above statements are true.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

Suppose that you have two machines. Machine A gives 10 horsepower, and machine B gives 20 horsepower...

Questions