Engineering, 31.01.2021 03:00 babygail0818

Can someone please do this for me ive been sick for the past week and am behind Identify the engineering innovation that you have chosen to investigate. State the inventor of the new technology, the year of the initial invention, and the problem that the technology was created to solve.
Describe what other technologies were available at the time that may have influenced your inventor.
Discuss tests done on the design and any modifications that were made to the original design. These modifications may have been made by the original inventor or by subsequent engineers.
Give your opinion as to whether the technology was a success or failure. Address whether or not the innovation solved the original problem.
Discuss the importance of your chosen technology in your current life.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

You know the right answer?

Can someone please do this for me ive been sick for the past week and am behind Identify the engine...

Questions