subject
Engineering, 26.01.2021 04:50 ranaaf

PLEASE HELP! |BRAINLIEST| Dennis Mallory has recently completed two years of flight training at his local communlty college. Although his Initial career plan was to become a commercial pllot, his time spent flying convinced him that he is far more Interested in a
career as an avionics mechanic. He and 14 other prospective avionics students are meeting today with you, the school's
most experienced avionics mechanics Instructor, at the maintenance facility for one of the nation's largest commercial
alrlines. In an essay of approximately 225 words describe what you will discuss with these prospective students with
respect to the training required to become a certified avionics mechanic, what specialties exist in the career, the type of
work avionics mechanics regularly perform, what skills and personal attributes the successful mechanic displays, and
any opportunities for career advancement,

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
PLEASE HELP! |BRAINLIEST| Dennis Mallory has recently completed two years of flight training at his...
Questions
question
Mathematics, 04.07.2019 05:00
question
History, 04.07.2019 05:00
question
Biology, 04.07.2019 05:00
Questions on the website: 13722363