Bryan wants to design a model that emphasizes risk mitigation and is a variation of the incremental design model. Which design model should he use?
A top-down design
B. spiral design
C bottom-up design
D. hybrid design

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.