Engineering, 11.01.2021 22:40 SoyAmbia

Match the scenario with the term it represents. John is part of an engineering design team. His role is to meet with the client and find out the cost restraints for a project. He then conducts a complex analysis that assesses all of the direct and indirect costs associated with the product’s design. He will periodically meet with the team to see if adjustments can be made to help meet the cost goals.

Tim is working on the cost of designing a building. At the moment, he is including the rent of the space that the engineers are using as well as the cost of the land for the building. Building permits are also included in this process.

While assessing the cost of a computer design, Aaron must determine the cost of a new material the engineers would like to use. He also must include the engineers’ salaries.

cost analysis

indirect costs

direct costs

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

You know the right answer?

Match the scenario with the term it represents. John is part of an engineering design team. His rol...

Questions