Engineering, 11.01.2021 09:30 brennarfa

A small size cooling tower is designed to cool 6 litres of water per second, the inlet temperature of which is 50 °C. The motor driven fan induces 10 m3/s of air through the tower and the power absorbed is 5.15 kW. The air entering the tower is at 18 °C, and has a relative humidity of 60 %. The air leaving the tower can be assumed to be saturated and its temperature is 26 °C. Assume that pressure remains constant throughout the tower at 1.013 bar. Calculate: a) The amount of cooling water (make-up) required per second
b) The final temperature of the water

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

Engineering, 04.07.2019 19:20

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

Answer

You know the right answer?

A small size cooling tower is designed to cool 6 litres of water per second, the inlet temperature o...

Questions